How was the Mary Rose raised from the seabed?

A floating crane lifted the surviving half of Henry VIII's warship out of the Solent in a steel frame on 11 October 1982, 437 years after it sank. Drying the waterlogged wood afterwards took until 2016, 34 years in all.

On 19 July 1545, during the Battle of the Solent, Henry VIII's warship Mary Rose sank off Portsmouth. The king watched from Southsea Castle. According to the Mary Rose Trust, the ship had served for 34 years, and historians still argue about why she went down.

She settled on her starboard side. The Trust explains that silt covered and protected that side, while currents and sea creatures wore away the side left exposed. Over more than four centuries, about half of the hull disappeared.

The search began in 1965, when the diver and writer Alexander McKee started Project Solent Ships with the Southsea branch of the British Sub-Aqua Club. An 1841 chart helped narrow down the site, and on 1 May 1971 divers found frames of the hull showing above the seabed. The Mary Rose Trust was set up in 1979 with Margaret Rule as its archaeological director, and more than 500 volunteer divers helped dig out the wreck.

The lift came on 11 October 1982. The hull hung from a steel lifting frame, which was moved underwater onto a cradle and raised by the floating crane Tog Mor. The Trust's account says the cradle broke the surface at 9:03 in the morning. The night before, working underwater in the dark, the team had placed one of the main lifting slings wrongly, so the frame came up tilted. At 11:49 that sling slipped back into its correct place, and the raised corner dropped into line with a crunch. Rule wrote that all hearts stopped, but the only damage was minor, to a single timber. The raising was shown live on television, and the Association for Project Management puts the worldwide audience at about 60 million.

Then came the slow part. Wood that has soaked for centuries can shrink by up to half and crack if it dries too fast. From December 1982 the hull was sprayed with chilled fresh water, and from 1994 to 2013 with polyethylene glycol, a wax that soaks into the wood and holds its shape. After the sprays were switched off in April 2013, the hull dried slowly in a sealed space at about 20°C and lost roughly 100 tonnes of water. In 2016, after 34 years, the main treatment was finished. The ship now stands in the Mary Rose Museum in Portsmouth.

Questions people ask

Why did the Mary Rose sink?

Nobody knows for sure. The explanation historians discuss most is that she heeled over in a turn and took in water through her open lower gunports, perhaps made worse by the weight of the soldiers and guns on board.

Can you see the Mary Rose today?

Yes. The hull is on show in the Mary Rose Museum at Portsmouth Historic Dockyard, together with thousands of objects that divers brought up from the wreck.

Why did the Mary Rose have to be sprayed for so long?

Wood that sits underwater for centuries is weak and held in shape by the water inside it. Dried too fast, it can shrink by up to half, warp and crack, so the hull was sprayed with water and then with polyethylene glycol before it was dried slowly.

What the video says

  1. In 1545 a king watched his warship sink. In 1982, sixty million people watched it come back up.
  2. The Mary Rose had been lying off Portsmouth for 437 years.
  3. Mud had saved half of her hull, and that half was coming up in one piece.
  4. On live TV, a giant crane lifted her out of the sea in a steel frame.
  5. Then a steel cable slipped, and one corner of the frame suddenly dropped.
  6. There was a loud crunch, and everyone held their breath. The ship held.
  7. Only one beam was hurt. Today she is in a museum in Portsmouth.

Source

Crash! The moment that made a nation jump

Mary Rose Trust, 2022-10-04

Read the source

Also in Spanish